ChooseWebHost

How to Add a Verified Logo to Your Business Email

How to Add a Verified Logo to Your Business Email (Step by Step)


Did you know you can add a verified logo to your outgoing business emails? This is similar to a social checkmark and verifies that your emails are genuine.

Spam and phishing attacks are common, and many users are concerned about being scammed. Displaying a verified logo can give your customers and readers peace of mind, resulting in them opening more of your emails.

In this article, we will show you how to add a verified logo to your business email.

Why Should You Add a Verified Logo to Your Business Email?

Email is an important part of any business, especially one you are running from a WordPress website. You want to make sure that your emails are delivered and actually read by your users and customers.

The problem is that your users will receive many emails each day from spammers and scammers. They may wonder if your emails are safe and avoid clicking on them.

You need a way to give them peace of mind. Wouldn’t it be good if there was a way to show readers and customers that your emails were actually sent by your business?

That’s where verified logos come in.

Verified Logo Examples

BIMI is a new email standard that stands for ‘Brand Indicators for Message Identification’. It verifies that emails are actually from the business claiming to send them. Your brand logo will be displayed next to genuine email messages to let your customers know that they are safe.

The location and appearance of your brand logo will depend on the email client being used, and some email providers still don’t display a verified logo at all. However, the BIMI standard is being supported by more and more email clients, especially on mobile devices.

BIMI Companies

However, getting a verified logo set up is complex. Like a jigsaw puzzle, there are a lot of steps that need to be completed, and it’s going to take some time.

This article will take you through the process step by step. Keep in mind that some of the steps are quite technical, and you might like to reach out to an IT or legal professional for help.

With that being said, let’s take a look at how to add a verified logo to your business email. Here are the steps we will cover:

Step 1: Creating a Professional Business Email Address

Are you still using a generic Yahoo, Gmail, or Hotmail email address for your business? Customers often don’t trust emails coming from a generic email account.

A custom domain email address looks more professional and gives credibility to your business. Make sure you get one that uses the same domain as your website.

For example, if your website’s address is miamiflorist.com, then your email address should look like john@miamiflorist.com.

If you don’t already have a business email address that uses your website’s domain, then you can set one up in five minutes using our guide on how to create a free business email address.

Or, if you prefer using the Google or Microsoft email web app, then see our guides on how to set up a professional address with Gmail and Google Workspace or Outlook (Office365).

Select use a domain you already own

Once you have a new email address, you may need to change the mail exchange (MX) records on your website. MX records tell internet servers where to send emails to and from your website’s domain name.

You will need to find the details of your new MX records from your email provider and then follow our guide on how to change MX records for your WordPress site.

Then finally, you may wish to use your new email address to receive notification emails from WordPress. To do that, simply follow our guide on how to change the WordPress admin email.

Step 2: Setting Up DMARC to Authenticate Genuine Emails

Now that you have a custom email address using your domain name, you can set up DMARC (Domain-based Message Authentication, Reporting, and Conformance) for your domain.

This allows email servers to tell the difference between your genuine email messages and fake emails from scammers using your address. It protects your users and customers against phishing attacks and also prevents your emails from being marked as spam.

Tip: If you are not sure whether your domain is already using DMARC, you can check using a checker like MXToolbox. This is important since you should only have one DMARC record.

BIMI requires email messages to be authenticated by DMARC before a verified business logo is displayed on your emails. This will make sure that the logo is only displayed on emails that actually come from you.

Then, all suspicious emails are either rejected or quarantined.

You set up DMARC by adding a new DNS record to your domain. The code that you will add depends on the needs of your business, and you can learn more on the DMARC website.

If you want email servers to reject all suspicious emails, the DNS record will look like this:

v=DMARC1; p=reject; pct=100; rua=mailto:john@miamiflorist.com

Or, if you want suspicious emails to be quarantined, the code will be similar to this:

v=DMARC1; p=quarantine; pct=100; rua=mailto:john@miamiflorist.com

Depending on your needs, the DNS record may contain some additional code.

Just make sure to change the return email address to your own business address. This address will be used to send you DMARC reports about scam emails that have been rejected or quarantined.

The exact method you use to add the DNS record will depend on the domain name registrar you are using. If you are using Bluehost, then you will need to log in and click on ‘Domains’.

Bluehost Domain List

This will list your domain names. Once you find the correct one, you should click the down arrow next to the ‘Manage’ button and select ‘DNS’ from the dropdown menu.

On the next page, you need to scroll down to the TXT section and click the ‘Add Record’ button to add a new TXT record to your DNS settings.

Adding a TXT Record to Your DNS Settings

Now you can add the DMARC record.

In the Host Record field, you should type ‘_dmarc’. Then, you can paste the DMARC code you chose above into the TXT Value field. You can leave the TTL setting with the default value.

Adding a DMARC Record to Your DNS Settings

Once you click the ‘Save’ button, your DNS settings will be updated. However, as with any DNS change, you will need to wait up to 48 hours for the new setting to take effect.

Step 3: Creating a Brand Logo for Your Business

You can think of a logo as the profile picture for your business. It helps your customers identify and associate your business with a visual identity. You will be using the logo on your website, social media accounts, email newsletter, and business cards.

If you don’t already have a brand logo for your business, then the first step is to create one, purchase one, or hire someone to make one for you.

For BIMI, this will need to be in the Scalable Vector Graphics (SVG) format. This is a vector image format that will make sure that your logo looks good in any display size.

Creating a Business Logo

You can create a logo yourself using web design software or a free logo maker.

Just make sure that the app can save your logo in the SVG format, such as Adobe Illustrator, Affinity Designer, Inkscape, or Sketch.

Your BIMI email logo should also follow these guidelines to be compatible with different email services:

Be centered so it can be displayed in a square, square with rounded corners, or circleHave a solid background, not a transparent oneBe saved as an SVG fileBe as small as possible and under 32 KB

Hiring a Professional Graphic Designer to Create a Logo

If you are not a graphic designer, then you might find it difficult to create a logo that looks good. Instead, you can hire a professional designer to create your business logo.

To learn some of the best places to get a custom WordPress logo within your budget, see our guide on the best places to get a custom logo.

Make sure you let the designer know that you need an SVG image that complies with BIMI’s general guidelines, as listed above.

Making Your Logo BIMI Compliant

The BIMI Group now requires your SVG logo to be in a specific format called SVG P/S (SVG Tiny Portable/Secure). However, this format is very new, and there are currently no graphics tools that can save in this format.

That means you must change the logo file to make it BIMI-compliant. You can do that using code by following directions on the official BIMI website.

Alternatively, you can use an SVG conversion tool that can modify the file for you.

Step 4: Trademarking Your Brand Logo so It’s Legally Yours

The next step is to trademark your logo. This is required because BIMI uses Verified Mark Certificates (VMC) to verify brand logo ownership. A VMC is currently only available for logos that are registered trademarks.

This will make sure that no one else can use your trademark as a verified logo, which will protect your users from scammers.

Note: To check if your business already has a trademarked logo, you can search the Brand Database run by World Intellectual Property Organization (WIPO) to find it.

Your brand logo will need to be registered as a trademark with an intellectual property office recognized by VMC issuers. They currently include:

Filing a trademark application is a legal process that needs to be handled carefully. It may take some time, so make sure you get started as soon as possible.

We recommend hiring a lawyer to help you apply for the trademark. You can also use online legal service providers like CorpNet, which provides legal services to small businesses and individuals at a low cost.

Learn more in our guide on how to trademark and copyright your blog’s name and logo.

Step 5: Uploading Your Brand Logo to Your Website

Now you need to upload your business logo to the website with the same domain as your email address.

For example, if your email address is john@miamiflorist.com, then you need to upload it to the website at miamiflorist.com.

Uploading the Logo File to Your Media Library

Many users will find it simpler to upload the logo file to the WordPress media library.

However, because SVG images contain code, WordPress does not allow you to upload them by default. This is to protect your site in case you got the file from an unreliable source.

You will need to follow our guide on how to add SVG image files in WordPress. We cover several methods, but the easiest is using a snippet from the WPCode pre-made library.

Allowing SVG Uploads Using WPCode

After that, you should navigate to Media » Library.

You can upload your logo using drag and drop or by clicking the ‘Add New’ button at the top of the screen.

Adding an SVG Logo to the Media Library

Once the image has been uploaded, you need to click it to open your logo’s attachment page.

Here, you will find a button where you can copy the logo’s URL to the clipboard. You should keep a copy of this in a safe place because you will need the URL later in this tutorial.

Copying the Logo's URL

Uploading the Logo File Using FTP

If you are a more advanced user, then you can use FTP to upload the file to your website.

After that, you need to right-click the file and copy the logo’s URL to the clipboard. You should paste this in a safe place because you will need it later in this tutorial.

Copying Your Logo URL Using an FTP Client

Step 6: Applying for a Verified Mark Certificate (VMC)

The next step is to apply for a VMC (Verified Mark Certificate). It verifies that your organization is the legal owner of your brand logo.

To do this, you will need to contact a BIMI-qualified certification authority. At this time, there are only two: DigiCert and Entrust Datacard.

The application process will require you to submit the SVG file of your brand logo that you created earlier.

When your VMC application is approved, the certification authority will send you an entity certificate Privacy Enhanced Mail (PEM) file.

You need to upload this file to your website using FTP.

After that, you need to copy the file’s URL to the clipboard and store it in a safe place with the logo’s URL that you copied earlier. You will need both of these URLs in the next step.

Copying the vmc.pem URL Using an FTP Client

Congratulations! You have now put all the pieces in place to turn on Brand Indicators for Message Identification (BIMI) for your domain. That’s what you will do next.

Step 7: Enabling a BIMI Verified Logo for Your Business Emails

To turn on BIMI, you will need to add another TXT record to your DNS settings, just like when you set up the DMARC record earlier.

The record will include the URLs to your logo and VMC certificate like this:

v=BIMI1; l=https://URLTOLOGO/logo.svg; a=https://URLTOCERTIFICATE/vmc.pem

Make sure you replace the logo and certificate URLs with the URLs you saved earlier.

Alternatively, you can generate the code you need using the official BIMI Generator Tool.

You need to navigate back to the DNS settings for your domain as you did in Step 2 of this tutorial. Then you should add a new TXT record like this:

Adding the BIMI Record to Your DNS Settings

The Host Record field needs to be ‘default_.bimi’ followed by a period and your domain name, such as default_.bimi.example.com.

In the Text Value field, you should paste the code you generated above. You can leave the TTL field with the default value.

After that, you will need to click the ‘Save’ button. It may take up to 48 hours for the new record to propagate around the internet.

Now your users will see a verified logo next to your business emails. Well done!

Step 8: Verifying That BIMI Is Set Up Correctly

After all the work you just did to create a verified logo for your business emails, it’s a good idea to make sure everything is working properly.

The best way to do that is to visit the official BIMI LookUp & Generator Tool. Simply type in your domain name to get a report that checks your compliance with BIMI standards.

The BIMI LookUp & Generator Tool

The report will show you whether your DMARC record is according to BIMI specifications. It will also show the contents of your BIMI DNS record, a preview of your verified logo, and whether your VMC certificate is BIMI-compliant.

If any problems are found, then the report will give you more details on what is wrong and how you can fix it.

We hope this tutorial helped you learn how to add a verified logo to your business email. You may also want to see our guide on the right way to create an email newsletter or our expert picks for the best email marketing services for small business.

If you liked this article, then please subscribe to our YouTube Channel for WordPress video tutorials. You can also find us on Twitter and Facebook.



Source link

Leave a Comment

Your email address will not be published. Required fields are marked *